| Bus type£º 6U CompactPCI
bus type |
| Support technique standard£ºPICMG 2.0 R3.0£¬PICMG
2.1 R2.0 and PICMG 2.16 technique standard |
| Processor£º Low-power
Intel Pentium®III 850MHz , BGA sealed CPU |
| System chipset£º Intel 815E chipset,100MHz
FSB |
| System memory£ºTwo 144-pin
SODIMM,up to 512MB memory |
| BIOS£º Ver AMI 7.0 PnP BIOS |
| On-board video£ºChipset
integrates entirety 2D/3D/DirectX graph accelerator and
system share memory.Adopted dynamic display memory technique£¨D.V.M.T.£©to
distribute display memory.Support highest resolving power
1600x1200, can connect front and back.¡£ |
| On-board LAN£º Double 10/100 Base-Tethernet
interfaces. |
| On-board audio£º Via back
I/O flashboard provide AC¡¯97 Ver 2.2 sound coding and
decoder£¬stereo input and output£¬microphone input and CD
audio input. |
| IDE controler£º Main IDE interface connect
with on board installation 3.5¨•harddisk£¬assistant IDE
interface connect with CompactFlash slot and one via back
I/O flashboard connective 40-pin standard IDE tie-in.
|
| USB interface£º Two USB
1.1 standsrd interfaces£¬can connect front and back. |
| PCI-to-PCI bridge£ºAdopted Intel 21150£¬TI
PCI2050£¬or HiNT4 32 bit 33MHz PCI bridge£¬can directly
drive seven PCI main equipments. |
| Multi I/O interface£ºOne
FDD interface,one parallel interface,four RS-232,one PS/2
keyboard and PS/2 mouse interface.Among these main and
asssistant serial interface with PS/2 keyboard and mouse
interface can connect front and back£¬others connect only
at back¡£ |
| Solid state disk interface£ºCompactFlash
interface |
| Watchdog timer£º 1-255
second or 1-255 minute£¬510 level£¬watchdog overtime interrupt
or restoration system¡£ |
| Hardware monitor£ºFor working power£¬CPU and
system chassis temperature detect and alarm when temperature
is over setting value. |
| Power£º +5V@2.1A , 3.3V@2.5A,
+12V@100mA |
| Dimension£º 233mm¡Á160mm £¨6U high£©£¬one Slot£¨4TE£©width |
| Operation Temperature£º0¡ãC£
60¡ãC |
Relative Humidity£º5% £ 90%,non-condensing 
